Optical fiber wireless router Internet access settings

[wangyueyue]

The use of Competitive HD 720p/1080p Video Conferencing System Equipment routers to share the Internet, regardless of the connection installation and setup is very simple. The specific connection settings for the FTTx+LAN access method are as follows:

The use of wireless broadband routers to share the Internet, regardless of the connection installation and setup is very simple. The specific connection settings for the FTTx+LAN access method are as follows:

1 Plug in the power cable of the wireless broadband router, and then remove the FTTx+LAN access cable connected to the network card and reinsert the WAN port of the wireless broadband router. When plugged in, the power indicator and WAN port light on the wireless broadband router will light up.

2 Then go to the computer accessories sales department to do a few twisted pair wires (usually 1-2 yuan/meter) according to the number of computers, and connect the RJ45 interface of the computer network card (don't forget to drive the network card, common 8139 The serial network card can be automatically recognized by Win2000 or XP) and is connected to one of the RJ45 LAN ports of the wireless broadband Huawei Next Generation XG PON OLT MA5800-X2 X7 X17. If you connect through a wireless network card, you don't need to. If you install the wireless network card driver, you can automatically search for a wireless broadband router. When connected, the corresponding LAN port LED on the wireless broadband router and network card will flash normally.

3 You can manually set the IP address for each computer's network card, or use the wireless broadband router's built-in DHCP server to automatically set the IP address. In these two methods, I only recommend that you use the second, which is to use a built-in DHCP server in the wireless broadband router to automatically set the IP address. To use this method, you don't want to add extra bits to set various parameters for your network card TCP/IP protocol. In other words, make sure that your network card's TCP/IP protocol is "Automatically obtain an IP address".

4 To use the wireless broadband router's built-in DHCP server to automatically set the IP address, you can power off the wireless broadband router and the computer. Then first turn on the Huawei 48 10 Gig SFP+ Ethernet Switch S6720-54C-EI-48S-AC power, and then start the computer later, so that the wireless broadband router built-in DHCP server will automatically set the IP address for your computer.

Note: If you do not want to restart your computer and your wireless broadband router to obtain an IP address automatically or if the wireless broadband router's built-in DHCP server fails to automatically set an IP address for your computer, you can do so by refreshing the IP address. In Windows 98/Me, click "Start → Run", enter "winipcfg" OK, then select "Update", you can get a new IP address for the local network card; and in Windows 2000/XP can open "Start → "Command Prompt" in the "Appendix", enter the "ipconfig /renew" command at the command prompt, you can also get a new IP address after the carriage return.

5 In the IE address bar, enter the WEB configuration IP address of the wireless broadband router (see the manual), such as 192.168.1.1, then enter the user name and password to enter the configuration interface of the wireless broadband router. Select "Dynamic IP (Ethernet Broadband, Obtain IP Address from Network Service Provider Automatically)" in the "Setup Wizard" of the wireless router's settings page, and then "Next" to share wireless Broadband router Internet access.

6 It should be noted that after setting “Dynamic IP”, you can “update” or “release” the IP address, subnet mask, gateway, and DNS server you obtained from the ISP's DHCP server in “WAN port settings”. information. And here you can also manually set the DNS server you need to set up. In addition, if you cannot obtain the IP address when the network connection is normal, it may be because some ISP's DHCP server does not support the Best Price Huawei 8/16 port GPON/EPON OLT MA5608T request method. You can select "Unicast mode to obtain IP" in this item.